JayB

I just researched the capsule, and it is rather impressive. Was unaware that such capsules or bubbles existed.

Any members out there utilize a vehicle cover? Please offer any advice or tips for buying and purchasing one. I own a 2018 Gen 2 R8 and want to get a vehicle cover for enhanced protection and to maintain cleanliness when it is at home. I reside on a hilltop, where the updraft carries various leaves and dust from the lower elevations. It is often astonishing that as soon as the garage door opens, leaves and debris immediately enter, making it impossible to prevent the intrusion of the elements. As the rainy season starts, I want to prevent the dripping from the garage door onto the vehicle during its opening and shutting. I understand the extra protection from any dents and bumps is another great feature of certain coverings. Kindly provide any suggestions or advice. Thank you in advance

Please provide your VIN number here. https://fusecard.bmw.com/

To ascertain the oil level while the engine is cool, I just remove the dipstick and examine it. The reading may change somewhat from one obtained after driving the engine at optimal temperature and after shutting it down for five minutes, but I can accept that. Provided you maintain consistency in your methodology, you may monitor any oil use by mental comparison to the previous measurement. It is my shortcut, but it is more logical for me to see it as a pre-start checklist. The critical moment to ascertain if an engine has sufficient oil is prior to its ignition.

It is essential to conduct frequent checks under consistent settings. I anticipate it will report a lower value on the stick immediately post-shutdown compared to after an overnight period. The owner's handbook has either become much more strict about dipstick reading, or I have not examined my closely enough. I have never seen the practice of removing the fill cap prior to assessing the fluid level, nor the need of operating the engine before evaluating the level. That is just absurd. I ensure that every engine has sufficient oil prior to starting it.

Did the noise begin immediately upon acquiring the vehicle, or did it manifest progressively over time?

Ensure that you inspect all the drainage lines around the panoramic roof. I recommend taking it to the dealer and informing them that you hear water. Neglecting this issue may result in water ruining the vehicle's electrical harness. I experienced it on a Volvo XC60. All panoramic roofs must have their drain lines inspected periodically, particularly if the vehicle is parked outside. The conduits will get obstructed, hindering adequate water drainage.

It is reassuring to learn that it is accessible on the P550e, since it was entirely unattainable on the P510e (albeit not an issue for the P440e) at the time I placed my purchase for the vehicle. I own four genuine seats in my vehicle, and for that expenditure, I expect to have the ability to choose the temperature control settings independently for each seat, as I have always had in every previous car with four genuine seats that I have had, even those from two decades ago. Possessing a 3-zone temperature control system is analogous to having three buttons for window operation. Two for the front doors and one for each back doors. Why?

The concept of three-zone climate control is somewhat bothersome. I am experiencing the same issue with the P510e. All previous versions are available with 4 zones; however, the P510e (and presumably the P550e) is limited to 3 zones.

It is presumably related to a US rule or certification.

Understood. I hope that there are no metallic particles present in the fluid and that it is in a good condition.

When did this issue begin occurring after the transmission fluid flush? Was the transmission fluid serviced at a Mercedes-Benz dealership or an independent automotive repair facility?

Could you please provide the year of the car, its mileage, and the date of the most recent transmission fluid change?

I strongly advise against driving the vehicle vigorously until this issue is resolved. Over-revving the engine may have severe consequences and put its lifespan at risk. I am curious as to why there are no codes present. It is my understanding that XENTRY was used to do code checks, correct?

When was the transmission fluid last inspected and/or replaced? There may be several factors contributing to the problem. Firstly, the Electronic Control Unit (ECU) should have a safety mechanism in place to prevent the vehicle from exceeding its maximum engine speed (redline). I am curious whether the Electronic Control Unit (ECU) is defective and failing to provide accurate instructions to the gearbox, but the transmission itself is in good condition.