Jump to content

infamousmelons

Members
  • Posts

    126
  • Joined

  • Last visited

Everything posted by infamousmelons

  1. I have visited Maui, Waikiki, and other locations in Florida. I would refer to Hawaii as Paradise. I have never experienced humidity in HI, nor have I seen any rusting vehicles like I have in Detroit, amusingly. I will see you as the authority in managing your surroundings. My concept would ostensibly undermine the desiccant bag method by continuous air exchange. Indeed, nature has a propensity for disorder, persistently endeavoring to dismantle human constructs.
  2. Agree on opening the fill cap to equalize pressures. In-tank fuel pumps use a brushless motor, eliminating arcing, and are not always fully immersed. gasoline level senders, nevertheless, possess low amperage voltage that is directly exposed to gasoline and vapor; yet, any possible damage to the sender that may generate a spark is insufficient to cause ignition. Explosions arise from the accumulation of explosive vapors; hence, it is crucial to mitigate this risk. I like the computer fan; however, it seems to be expelling air outside. I would have it draw in air, inflate your 'balloon', then position a tiny vent hole opposite the blower to expel any accumulated gasses. I have installed almost 1000 furnaces. Initially, I would operate the new installation to purge air from the new natural gas line, followed by using a torch along the gas line to detect natural gas leaks. Occasionally, a fitting requires tightening; nevertheless, on two occasions, a sand-cast fitting exhibited a pinhole that emitted a flame around the size of a cigarette lighter. No detonations due to the absence of buildup. Hooray for Chinese workmanship.I consistently repurpose outdated fixtures wherever possible.
  3. Negative. Unable to shift beyond Neutral (reverse or park). I inspected today and saw a little leak in a corner of the gearbox pan. Considering that low ATF levels may contribute to the issue.
  4. Reviewed today. They are satisfactory. They were substituted last year. I attempted to manually shift while I was there but was unable to do so.
  5. Affirmative, I get that. I need knowledge on the internal safety switch or solenoid that inhibits the transition from neutral or drive to reverse while the vehicle is in motion. My device seems to be malfunctioning, as it activates even while I am motionless. I am considering obtaining an overhaul or rebuild kit, since it is likely necessary. It is hoped that this resolves the problem.
  6. Does anybody know the designation of the valve body or who is responsible for inspecting it?
  7. https://www.peachparts.com/shopforum/tech-help/334781-w126-1984-trans-locked-out-reverse-park.html
  8. Operated my 1988 300SEL to the store and maneuvered into a parking place. When I attempted to shift from drive to park, I was unable to go beyond neutral. I learned from a later model that the gearbox has a solenoid that prevents engagement of reverse gear while in motion to avoid unintentional shifting. No more symptoms apart than lately remaining in first gear until reaching a higher RPM before upshifting. I can transition from N - D - 3 - 2 effortlessly. Do you have any opinions?
  9. I had an Audi A8, and whenever it rained while parked outside, I distinctly heard the sound of water flowing down a channel near the A-pillar to the bottom upon the car's first movement. I spoke with the vendor, and they said that it is customary. for RR may be same
  10. I believe it is unfavorable as it seems somewhat deteriorated in comparison to a fresh one.
  11. Thank you. One would assume that an individual can visually assess it and immediately determine its quality.
  12. 2001 S430. Was wondering if anyone knew how to gauge whether this thing needs replacement. Thanks!
  13. Thank you. Indeed, the vehicle is equipped with foldable mirrors. Is there a method to install V10 plus mirrors or revert to the pre-facelift version? Thank you.
  14. My anticipated V10 has several appealing carbon components, except the door mirrors. I am enquiring if any aftermarket components are compatible and aesthetically acceptable, or if I should only use OEM parts. Locating authentic components seems to be somewhat challenging as well. Salutations
  15. In regards to my 2010 V10, I encountered a similar level of rust on the suspension as you have described. When I spoke with Ricky about this matter, he assured me that it was a common occurrence and not a cause for worry.
×
×
  • Create New...